TrueEdge™ — Achieve Drywall Edges That Tape Flat with One Smooth Stroke

$44.99

~~$74.99~~ $44.99

Sale Sold out

Fast Shipping (incl. Track & Trace)

High Quality

FREE US Shipping

Hassle Free Returns

Only 8 left in stock

Shape Crisp 45° Drywall Edges That Tape Perfectly — No Rasping, No Fuzz

Your utility knife left rough, uneven cuts. The TrueEdge™ Chamfer Plane smooths a precise 45° bevel on every cut edge in one go — so your tape lies flat, your mud spreads thin, and you won’t be back fixing cracks in six months.

End the Struggle with Jagged Drywall Edges That Refuse to Lay Flat

Knife-cut edges are often jagged, fuzzy, and irregular. Trying to tape over them causes seams to show through your topcoat — or worse, cracks after the wall settles. Surform rasps help but can eat up an hour in one room and leave your wrist sore. There's a quicker solution.

➤ Set It Once, Cut Every Edge Consistently: Adjustable chamfer depth from 2–9mm (~0.08–0.35"), plus 0–12mm flat-plane mode for trimming high spots. Choose your setting, lock it, and every pass stays identical — no angle babysitting needed.

➤ Holds the Board, Not Your Wrist: With its aluminum body and non-slip thumb pad hugging the edge, the blade won’t dig in, skip, or jam. You can plane through a full sheet without wrist fatigue.

➤ Change Blades in Less Than 30 Seconds: Just loosen the knob, lift the clamp, pop in a new blade, tighten up. Comes with 10 spare blades — plenty to finish a basement, garage, and spare room.

Dual Blades, One Aluminum Frame, Zero Tear-Out

The body houses two blade positions: a 45° angled blade for chamfering edges, and a flat blade for trimming high spots flush. Loosen the thumb knob to swap which blade is out, then lock it—done in under a minute without tools.

The non-slip thumb pad is where most cheap planes falter but this one excels. It keeps the body perfectly flush on the board edge so the blade won’t gouge the gypsum or rip the paper. You’ll notice the difference the first time you tape over your work.

Why DIYers Ditched the Drywall Rasp

News travels quick on basement forums. “Finished three rooms last weekend; cuts came out cleaner than factory-tapered edges. Wish I’d had this on my last job — would’ve saved hours rasping.” — Mike R., Ohio. Same feedback time and again: uneven seams become smooth chamfers, tape lies flat first try, mud spreads thin.

Sharper Edges, Quicker Walls, Less Sanding

✓ Tape Lies Flat Right Away: A steady 45° chamfer gives joint compound a solid grip — no lumps under tape, no cracking down the line.

✓ More Than Just Drywall: Works on gypsum board, MDF, cork sheets, acoustic panels — same blade, same clean edge. One tool tackles most materials in your workshop.

✓ Quieter Than Power Tools, Faster Than a Rasp: Hand control means no dust storm, no cord, no shredded paper edges. Just clean curls of gypsum peeling away.

From Box to First Cut in Three Easy Steps

Step 1: Loosen the thumb knob and lift off the blade clamp — all tools included make it quick.

Step 2: Insert a fresh blade (or flip the existing one), pick your chamfer depth, then tighten the knob firmly.

Step 3: Hook the body on the cut edge, pull along the sheet, and see a crisp 45° chamfer created in a single pass.

TrueEdge™ Chamfer Plane	Drywall Rasp	Utility Knife Alone
Adjustable 45° chamfer + flat plane in one body	❌	❌
Non-slip thumb pad keeps the edge flush — no skipping, no tear-out	❌	❌
10 spare blades + tool-free swap in under 30 seconds	❌	❌

Inside the Box

Body: Aluminum alloy with non-slip thumb pad and steel hardware
Dimensions: 17cm × 6cm × 4.2cm (6.7" × 2.4" × 1.65") — palm-sized and fits on your tool belt
Chamfer Depth: Adjustable 2–9mm at 45° (0.08–0.35")
Flat Plane Depth: Adjustable 0–12mm (0–0.47")
Included: 1 plane body + 10 spare blades + adjustment knob/wrench

Have Questions? We've Got Real Answers.

Will it fit standard ½" and ⅝" drywall?

Absolutely. Its 0–12mm flat and 2–9mm chamfer range fits both ½" (12.7mm) and ⅝" (15.9mm) gypsum board with ease. Set once and plane away.

Does it truly smooth fuzzy knife-cut edges or just nick them?

It carves a fresh, clean 45° bevel on the cut edge, including the paper. Knife-induced tear-out is shaved off in one pass — no rasp needed afterward.

How durable are the blades?

Each blade can typically finish 15–25 drywall sheets before dulling. With 10 spares included, you’re set for most jobs.

Can beginners get clean cuts right away?

Yes. Just set the depth, hook on the edge, and pull. The thumb pad keeps the body flat — no skill or angle babysitting required.

Any safety tips I should follow?

Wear safety glasses (expect gypsum dust), keep out of reach of children, and store dry. The blades are sharp — treat them like utility blades.

Give It a Go on Your Next Wall — 30-Day Tape-Flat Promise

If TrueEdge™ doesn’t carve a chamfer clean enough to lay tape flat, return it within 30 days for a full refund. No restocking fees, no "send a video first" hassle. Worst case, you lose a few minutes trying it. Best case, you never need a rasp again.