FlexiGrip™ — Fit Any Faucet In Tight Under-Sink Spots Without Needing A Plumber

$19.99

~~$29.99~~ $19.99

Sale Sold out

Fast Shipping (incl. Track & Trace)

High Quality

FREE US Shipping

Hassle Free Returns

Only 8 left in stock

Tighten That One Faucet Nut Your Hand Can’t Even Reach

Swapping out a kitchen or bathroom faucet sounds straightforward — until you're lying flat on your back, halfway inside the cabinet, struggling to turn a brass basin nut you can’t see or grab. FlexiGrip™ is the slender 7-inch steel tube that slips past your drainpipe, fits over the faucet shank, and lets you twist that hidden nut from below with one hand — no plumber, no hours wasted, no scraped knuckles.

Quit Battling Channel Locks That Just Don’t Fit

You know the struggle. Adjustable wrench? Too wide for the space. Channel locks? Slip off every other turn. Standard basin wrench? Costs $40 and still can’t get the jaw aligned. The tiny four-inch clearance between drainpipe and wall under your sink traps the nut you have to turn — and every wrench you own chokes on it.

➤ Slim 7-inch tubular shaft slips where wrenches can’t: Hollow and just 50–60mm wide — designed to slide past supply lines and drainpipes that block every other tool.

➤ Multi-size notched ends fit 5–6 common faucet nut sizes: 8mm, 10mm, 13mm, 22.8mm, 25mm, 30mm, 34mm, and 40mm across the two types — covering nearly every kitchen and bathroom faucet made in the last ten years.

➤ Solid carbon steel — built to turn, not flex: No plastic that bends under pressure. Aluminum basin wrenches strip nuts; FlexiGrip™ grabs tight and holds firm.

Why A 7-Inch Steel Tube Outperforms Any Basin Wrench You’ve Tried

A typical basin wrench uses a pivoting jaw on a long handle. Sounds smart — until the handle jams on supply lines and the jaw clamps sideways instead of squarely on the nut. FlexiGrip™ skips the jaw completely. The tube slides straight down over the faucet shank, its notch seats perfectly on the brass nut, and you twist it like a hefty socket wrench. Square contact. Full turning range. No slipping.

Both ends have notches in different sizes, so one tool covers the faucet base nut and the smaller fitting nuts on the supply lines — no need to crawl out for a different wrench.

DIYers Who Once Called Plumbers Are Now Doing Faucets Themselves

New customers often ask: "I bought a faucet from the hardware store — can I really install it myself?" The honest reply from users: yes, usually within 20–40 minutes for a typical kitchen faucet swap. Even those with zero plumbing experience finish the job on a single Saturday morning instead of waiting weeks for a plumber appointment.

"I was doubtful because every cheap basin wrench I owned slipped or stripped the nut. This one actually grips tight. I installed my new faucet before my coffee went cold." — Mike R.

Install Your Faucet And Get Water Flowing Today

✓ Complete a faucet swap in a Saturday morning: Most DIYers finish removal, installation, and supply hookup within 20–40 minutes once they have the right wrench.

✓ Works for kitchen sinks, bathroom basins, and laundry taps: One tool fits all faucets around the house. The notch sizes cover the majority of common residential fittings.

✓ Saves you $150–$300 in plumber fees: Faucet replacement is a top-margin service call. Doing it yourself with the right tool makes all the difference.

How It Works: 3 Steps To Freedom

Step 1: Slide the FlexiGrip™ tube up past the drainpipe and over the threaded faucet shank.

Step 2: Seat the matching notch onto the brass mounting nut — choose the end that fits your nut size.

Step 3: Twist the tube counter-clockwise to loosen or clockwise to tighten. One-handed turns, no jaw adjustments needed.

FlexiGrip™	Adjustable Wrench	Standard Basin Wrench
Fits the 4-inch gap behind the drainpipe	❌ Too bulky	⚠️ Jaw catches
Square grip on the nut — won't strip	❌ Slips	⚠️ Clamps sideways
Handles 5–6 nut sizes per variant	Single range	Single jaw

Detailed Specifications

Material: Carbon steel, powder-coated black finish
Shaft length: 185mm (7.28 inches) — reaches deep cabinet space
Flange width: 50mm (Type A) or 60mm (Type B)
Type A — 6 notches: fits 8mm, 10mm, 13mm, 22.8mm, 25mm and 40mm nuts
Type B — 5 notches: fits 8mm, 10mm, 23mm, 30mm and 34mm nuts
Available colors: Black or orange
Package contents: 1 × FlexiGrip™ multi-notch faucet wrench

Questions Before You Crawl Under Your Sink

Which type should I choose — Type A or Type B?

Type A covers 6 sizes including the 40mm large nut common on modern pull-down kitchen faucets. Type B fits 5 sizes including 30mm and 34mm, typical on older bathroom and laundry faucets. If you’re unsure, Type A is usually the safer bet for kitchens.

Will it fit my faucet brand?

FlexiGrip™ works with the standard brass mounting nuts used by Moen, Delta, Kohler, Glacier Bay, Pfister, and most off-brand fixtures. The notches cover common residential nut sizes from 8mm up to 40mm. Always double-check your faucet's specs if you have unusual fittings.

Can this really fit in the gap under my sink?

Yes — the shaft is 50–60mm wide and hollow, designed to pass the standard drainpipe and supply lines. If your hand fits inside the cabinet, FlexiGrip™ will too.

Is it tough enough for a rusty old nut?

Made from carbon steel to handle strong torque without bending. For heavily corroded nuts, spray penetrating oil first, then leverage the tube — its wide shaft gives more mechanical advantage than thin-handled basin wrenches.

What if it doesn’t fit my faucet?

Compare the notch sizes listed with your faucet’s mounting nut diameter before ordering. These two variants cover 8 of the most common residential sizes — but measuring twice saves returns.

Quit Delaying That Dripping Faucet — Fix It This Weekend

That new faucet has been sitting unopened on your counter for three weeks. The leak beneath the sink is getting worse. The plumber wants $200 and isn’t available until next Thursday. FlexiGrip™ is the missing link — the rest is just twenty minutes on a Saturday morning.