LumaRidge™ — Illuminate Every Wall with Cozy Gallery Light, No Electrician Required

$59.99

~~$119.99~~ $59.99

Sale Sold out

Fast Shipping (incl. Track & Trace)

High Quality

FREE US Shipping

Hassle Free Returns

Only 8 left in stock

Achieve Gallery-Quality Lighting on Any Wall—No Electrician, No Cords

Your artwork deserves more than distant ambient light. LumaRidge™ is a rechargeable picture light that installs above your frames in just five minutes, operates wirelessly for up to 20 hours per charge, and lets you customize the perfect warmth to enhance the colors you invested in. No wiring. No drilling for outlets. No electrician needed.

Don’t Let Your Finest Art Fade Into Darkness After Sunset

You chose the prints, invested in the framing, hung them at eye level — but come 6pm, they disappear against the wall. Ceiling downlights miss the mark. Floor lamps bathe the room in yellow. And every wired picture light means calling an electrician or trailing an unsightly cord along plaster you vowed to keep intact.

➤ Magnetic Charging in Under 60 Seconds: The light head detaches from the bracket, charges via USB-C, and snaps back into place magnetically—no removing the mount or wrestling cables behind your frame.

➤ Three Color Temperatures & Full Dimming: Toggle between warm, natural, and cool lighting with the remote. Match a candlelit dinner, bright Sunday morning, or any ambience between.

➤ 120° Tilt for Precise Beam Positioning: Rotate the head to aim the beam perfectly at any frame size—small prints or large canvases—with zero shadow on the matting.

How LumaRidge™ Delivers Gallery-Level Lighting Without a Single Wire

Inside a sleek aluminum frame, a 5W LED panel with an even-diffusion lens produces the same quality beam as wired picture lights in luxury hotels, powered by an internal 4400 mAh battery offering 12 to 20 hours of cordless use on a full charge.

When it’s time for a recharge, simply magnetically remove the light head from its bracket, plug it into any USB-C cable, and snap it back in place. The bracket stays mounted on your wall throughout. No screws to take out. No full unit to remove. No electrician required.

Why Renters and Owners of Older Homes Prefer This Over Hardwired Picture Lights

Most buyers assume they need an electrician—until they install a LumaRidge™ themselves in five minutes flat. The biggest surprise in reviews isn’t the brightness; it’s how truly warm the warm setting looks against gold frames and wood tones. "I was doubtful since every battery light I tried threw off a cold bluish tint. This one’s genuinely warm, and three weeks in I still haven’t had to recharge." — Megan H.

Well-Designed Lighting You Control from the Couch

✓ Adjust the Ambiance Without Getting Up: Change color and brightness from the remote—warm low light for wine nights, brighter natural hues when you’re really admiring the art.

✓ Installs in Around 5 Minutes with Two Screws: Only the bracket makes contact with your wall. Two screws, a basic screwdriver, and it tucks neatly behind the light head once mounted.

✓ Up to 20 Hours Per Charge: Dimming warm light lasts close to 20 hours; bright cool light runs nearer 12. Either way, you'll charge it every couple of weeks, not every night.

From Unboxing to Perfect Glow in 3 Simple Steps

Step 1: Center the bracket above your frame, mark the spots, and secure it with the two included screws. Takes about a minute with a regular screwdriver.

Step 2: Charge the magnetic light head using the USB-C cable, then snap it onto the bracket— it clicks in place effortlessly.

Step 3: Use the remote to select your preferred color temperature and brightness, then tilt the light head up to 120° to aim the beam exactly where you want.

LumaRidge™ Cordless	Hardwired Picture Lights	Floor Lamps & Overheads
✅ No electrician, no outlet needed—just two screws and you're set	❌ Requires wired installation or a visible cord running down the wall	❌ Ambient yellow wash that never directly lights the frame
✅ Three color temperatures plus remote dimming	❌ Fixed color, often too cool for warm interiors	❌ Changing bulbs required whenever you want a different light
✅ Magnetic detachment for USB-C charging—the bracket stays put on the wall	❌ Fixed to its outlet with no ability to move	❌ Moving the lamp disrupts the light angle

The Specs You Actually Care About

Build: Aluminum housing, iron bracket, ABS trim pieces—a thin profile that doesn’t compete with your frame
Sizes: 11.8 × 1.6 × 1.1 in (30 cm) or 15.7 × 1.6 × 1.1 in (40 cm)—choose the size that fits your frame width
Finishes: Gold, Black, or White—to complement modern, classic, or minimalist styles
LED: 5W with an even-diffusion lens—bright, shadow-free, no hotspots
Battery: 4400 mAh rechargeable with USB-C input, providing 12–20 hours per full charge

Answers to Your Most Asked Questions

How often will I need to remove it for charging?

At dimmed warm settings—the common evening use—you’ll get close to 20 hours per charge, so charging will be needed roughly every two to three weeks for most homes. At full brightness and cool setting, expect about 12 hours.

Does the warm setting genuinely look warm, or just less blue?

The warm tone is authentic—closer to candlelight than typical office white. The most frequent review is how much warmer it looks compared to other battery-powered picture lights people have tried.

Is the installation renter-friendly?

The bracket attaches with two small screws—the same type used for hanging a small picture frame. Patch holes with a bit of spackle when you move. No outlets or cords involved.

How exactly does the magnetic charging work?

The light head easily pulls off the bracket with a gentle pull, charges via any USB-C cable, and snaps back on guided by the magnet. The bracket remains mounted on your wall at all times.

Which size is right for me—30 cm or 40 cm?

The 30 cm (11.8 in) is ideal for frames about 16–24 inches wide. The 40 cm (15.7 in) fits frames 24–36 inches wide. Center the bracket above your frame so the light tilts down onto the artwork.