PrecisionPro™ — Cut Factory-Sharp 45° Tile Miters Without Using a Wet Saw

$34.99

~~$64.99~~ $34.99

Sale Sold out

Fast Shipping (incl. Track & Trace)

High Quality

FREE US Shipping

Hassle Free Returns

Only 8 left in stock

Achieve Factory-Sharp 45° Tile Miters Without Renting a Wet Saw

End the frustration of chipping $14 porcelain tiles whenever the blade snags. The PrecisionPro™ Tile Chamfer Stand secures your Type 100 angle grinder along a fixed 45° guide so the diamond blade handles the cutting — not your wrist. Features include integrated water cooling, four locking knobs for bed adjustment, and a stainless-steel cradle that keeps accuracy cut after cut.

Stop Destroying Tiles With Unsteady, Chipped Freehand Miters

You know how it goes: the grinder wavers, the blade jams halfway through, and the porcelain surface cracks exactly where it’s most visible. Renting a wet saw sets you back $80–$120 daily. A basic manual cutter only manages 90° splits, not 45° miters. So you keep freehand cutting — and keep wasting expensive tiles.

➤ Fixed 45° track banishes wobble: The cradle locks your grinder firmly at an exact 45°, while the steel bed supports the tile flat beneath — no drift, no chatter, no uneven edges on your finish.

➤ Push-fit water cooling prevents chipping: An integrated water-line feed continuously drips onto the blade during cutting — cuts dust, cools the diamond, and protects the porcelain face from chips.

➤ Four-knob adjustment fits any tile thickness: Rotate the locking knobs to flex the bed beneath your blade for tiles up to 15mm thick — whether wall tile, floor tile, or stone slab, all with the same setup, no changing jigs.

How The PrecisionLock™ Cradle Creates Factory-Perfect Miters

Most chips occur as the blade exits the tile. Freehand cuts cause the disc to tilt just slightly at the worst moment, fracturing the porcelain surface. The PrecisionLock™ cradle removes that wobble — your grinder fits snugly in a steel collar that stays rock-solid while the tile slides flat on the bed below.

Add in the push-fit water line, and the diamond stays cool on every pass, preventing glaze build-up and keeping the cut edge sharp. That’s the difference between “looked done by an amateur” and “looks tile-shop perfect.”

Why DIY Renovators Are Ditching Wet-Saw Rentals

After cutting precision 45° miters on tough porcelain with this stand, freehand battling the grinder feels punishing. DIYers, weekend tilers, and contractors running small jobs all say the same: faster to set up than lugging a wet saw, less mess, and miters that fit factory-tight once grouted.

“I broke two porcelain tiles cutting freehand before this arrived. Once I locked it in, I cut sixteen miters straight — every one tight enough to grout a 1mm line. Wish I’d ordered it before starting the bathroom.” — Marcus T.

Cut Tiles Like A Pro, Not Like A Newbie

✓ Consistently tight-fitting miters: Secure the bed, slide the tile, and achieve chip-free 45° edges that grout cleanly into 1–2mm outside corners.

✓ Compatible with porcelain, ceramic, and stone: One setup handles wall tile, floor tile, and stone slabs up to 15mm thick — no need to swap out any jigs.

✓ Built tough for more than one bathroom: Heavy-duty stainless platform and reinforced metal cradle deliver reliable cuts time after time — won’t bend out of square mid-project.

Setup Takes Under 90 Seconds — Then Just Cut

Step 1: Place your Type 100 angle grinder into the steel cradle — fits gearboxes up to 4.5cm (1.77") wide — and secure with the PrecisionLock™ collar.

Step 2: Turn the four bed knobs to accommodate your tile thickness, then attach a standard water line into the push-fit connector for cooling and dust control.

Step 3: Power on, feed the tile flat along the bed, and let the locked 45° guide do the hard work — every miter is consistently perfect.

What You Need	PrecisionPro™ Stand	Handheld Cutting
Chip-free 45° miters	✅ Locked bed, every cut	❌ Wavy, chipped edges
Water cooling for porcelain	✅ Push-fit hose connector	❌ Dry-cut dust and glazing
Holds true cut after cut	✅ Stainless cradle, won't flex	❌ Wrist fatigue, drift

Technical Specs Made Simple

Fits Your Grinder: Type 100 angle grinders with gearbox/neck diameter up to 4.5cm (1.77")
Material: Heavy-gauge stainless steel platform with reinforced metal cradle
Cut Angle: Locked 45° for chip-free chamfer miters
Tile Thickness: Adjustable bed handles tiles up to 15mm
Base Dimensions: 13.5cm (W) × 30cm (L)
Water Cooling: Push-fit connector for standard water-line tubing
Includes: 1× PrecisionPro™ Tile Chamfer Stand

Got Questions? We've Got You Covered

Will this fit my angle grinder?

If your grinder is a Type 100 (4" / 100mm) with a gearbox neck up to 4.5cm (1.77") wide, it fits right in. Most major brands — DeWalt, Makita, Bosch, Milwaukee — are compatible. Measure the round housing behind the disc guard if unsure.

Does the water cooling actually work?

Absolutely — especially critical on dense porcelain. A wet blade cuts cooler, won’t glaze, and exits without breaking the tile face. Plus, it reduces over 80% of the dust cloud compared to dry cutting.

What tile thickness can it handle?

The adjustable bed accommodates tiles up to 15mm thick — from standard 8mm wall tile to 12mm floor porcelain and thicker stone slabs. Twist the four knobs to slide the bed beneath your blade.

Is the metal quality solid or thin stamped steel?

Genuine stainless steel platform, reinforced cradle, and sturdy hardware. Built to handle full bathroom or kitchen projects without flexing out of alignment — not a disposable tool.

Is the angle grinder included?

No — this package includes the PrecisionPro™ Tile Chamfer Stand only. You’ll need your own Type 100 angle grinder and a diamond cutting/grinding blade rated for tile.

Designed For Tilers Seeking Tile-Shop Edges Without The Tile-Shop Price

If your PrecisionPro™ stand doesn't produce chip-free 45° miters right out of the box, return it for a full refund — no restocking fees, no hassle. Cut the cleanest miters of your renovation—or you owe nothing for the tool.