ProGrip™ — Lift Heavy Tile, Glass, and Mirrors Alone Without a Single Slip
ProGrip™ — Lift Heavy Tile, Glass, and Mirrors Alone Without a Single Slip
High Quality
FREE US Shipping
Hassle Free Returns
Couldn't load pickup availability
Lift Heavy Tile, Glass, and Mirrors Solo — No Slips, No Scratches, No Buddy Needed
Forget the hassle of bare-hand lifts. The ProGrip™ Suction Lifter secures itself to polished tile, tempered glass, mirrors, sealed stone, and sheet metal with a 118mm vacuum pad and an 8mm rubber gasket — powerful enough to carry a heavy porcelain slab single-handedly, gentle enough to avoid any marks on a mirror finish.
Tired of Bare-Hand Lifts, Flimsy Cups That Fail, and Worrying About Dropping $80 in Tile?
Bare hands slide on polished surfaces. Cheap plastic suction cups lose vacuum during lifts without warning. The two-people-and-hope method works until your helper flakes out on Saturday morning. You need a solo airtight grip that holds firm from press to release — every time, no exceptions.
➤ 118mm Vacuum Pad That Grips and Holds: Flatten the pad, flip the cam lever, and the rubber gasket pulls a vacuum strong enough to hold heavy porcelain planks, tempered glass sheets, and full mirrors one-handed.
➤ 8mm Rubber Gasket — Thick Enough to Cling, Soft Enough to Stay Mark-Free: Cushions polished surfaces so you get no scuffs, no suction rings, and no residue to clean once released.
➤ All-Metal Frame + ABS Cam Lever: The 170mm yellow alloy frame stays rigid under pressure. The 80mm cam throw locks in less than a second — no thumb fatigue, no half-closed lever slipping mid-lift.
How a Single Cam Lever Turns a Rubber Pad Into a Glass-Grip Vise
Press the 118mm pad flat on any clean, non-porous surface — polished porcelain, tempered glass, sealed marble, sheet metal, or finished plywood. Flip the 80mm cam lever and the rubber gasket molds into a sealed pocket, creating a partial vacuum that locks tight until you release it.
The yellow alloy frame resists bending under load, keeping the seal intact. The 24mm knurled steel knob offers precise pressure control. The textured ABS lever stays secure even when your hands are dusty from cement board or coated with tile adhesive — exactly when you need a reliable grip.
Why DIY Renovators and Weekend Tile Pros Reach for This Instead of Calling a Buddy
Whether remodeling a bathroom, installing a backsplash, or swapping out a glass shower, those who once needed a second pair of hands now handle big slabs solo with this tool in their kit.
"I was about to text my brother-in-law to help set a 30x60 porcelain plank. Instead, I used this, set the slab solo in ten minutes. Saved my back and the tile." — Mike R., Phoenix AZ
What Changes the First Time You Put It to Work
✓ Solo Lifts Become Simple: No more chasing down a helper on Saturdays. Stick the pad down, flip the lever, lift — done.
✓ Polished Surfaces Stay Spotless: The 8mm rubber gasket clings firmly without scratching, scuffing, or leaving suction marks on glass, mirrors, or shiny tile.
✓ The Scary Bit Loses Its Bite: When you trust the seal won’t give out mid-lift, even the toughest installs become the easiest.
3 Steps to Lock in a Vise-Grip Seal
Step 1: Clean and dry the surface completely — dust kills suction faster than a worn gasket.
Step 2: Press the rubber pad flat onto the surface, then flip the cam lever fully down to create the vacuum seal.
Step 3: Lift, move, or hold as long as needed. Flip the lever back up to release with a gentle pop — no marks left behind.
| ProGrip™ Suction Lifter | Bare Hands + Gloves | Cheap Plastic Suction Cups |
|---|---|---|
| 118mm vacuum pad + all-metal body supports heavy slabs single-handedly | ❌ Hands slip on polished surfaces, chip edges | ❌ Vacuum breaks mid-lift without warning |
| 8mm rubber gasket grips without scratching glass or mirrors | ❌ Fingerprints smudge the finish | ❌ Hard plastic edges leave suction marks |
| Metal frame + ABS cam lever locks quickly in under a second | ❌ Requires two people — but your helper bails | ❌ Breaks after a few uses |
Specs for the Detail-Oriented
- Color: Yellow powder-coated metal body
- Dimensions: 6.7 in length × 4.3 in height (170mm × 110mm)
- Suction Pad: 4.6 in diameter (118mm) with 0.31 in (8mm) rubber gasket
- Cam Lever: 3.1 in (80mm) throw, textured ABS grip
- Materials: Metal alloy body, ABS lever, rubber gasket
- Includes: 1 ProGrip™ Suction Lifter
Questions? Here's What You Really Need to Know
Will it hold a heavy porcelain plank without the seal failing mid-lift?
Yes — on clean, smooth, non-porous surfaces the 118mm pad creates a strong vacuum that supports heavy tile, glass, sealed stone, and sheet metal. Clean dust off before sealing for the best grip.
Will the rubber leave marks on polished glass or mirror finishes?
No. The 8mm rubber gasket is soft enough to seal neatly — releasing cleanly without suction marks or residue, even on glossy tile and polished glass.
Does it work on textured tile, raw stone, or porous surfaces?
It requires a smooth, non-porous surface to form a tight vacuum — polished porcelain, sealed marble, glass, metal, and finished plywood work well. Rough stone, raw concrete, or unsealed porous tile won’t hold a seal.
Is the body real metal, or just metal-colored plastic?
Genuine metal alloy — that’s the yellow main frame in the images. The cam lever is reinforced ABS plastic for durability and grip, and the gasket is rubber. No faux-metal plastic parts here.
How do I safely release the seal without dropping the panel?
Support the panel with your other hand or rest it on a stable edge, then flip the cam lever back up. The vacuum breaks with a soft pop and the pad lifts away cleanly.
Stop Struggling with Lifts. Start Setting Tile Like a Pro.
Pick up the ProGrip™ Suction Lifter and transform the toughest part of your install into the easiest. No helper necessary. No marks on your $80 tile. Just smooth, precise lifts — every time you engage the lever.
Rated 4.7 / 5 based on 1289 reviews. Showing our 5-star reviews.