RadianceTrack™ — Illuminates Your Trunk With Auto-On Light Whenever You Open It
RadianceTrack™ — Illuminates Your Trunk With Auto-On Light Whenever You Open It
High Quality
FREE US Shipping
Hassle Free Returns
Couldn't load pickup availability
At Last, See Every Inch of Your Trunk the Instant You Open the Lid
Forget digging around in the dark for that one bag at the back. The RadianceTrack™ LED Light Strip connects directly to your factory trunk light cable, illuminating your entire cargo space the second the lid lifts. Cut it to size, peel, stick — all done in under 10 minutes, with no drills, no wire splices, and zero risk to your car’s electronics.
No More Fumbling in a Dark Trunk When the Sun Goes Down
Your stock trunk light is a joke — a single dim spot barely covering a third of your space. After work unloading, grabbing kids’ gear from side pockets, or hunting for the jack at 11pm roadside — you’re squinting, dropping stuff, or balancing your phone between your teeth. Sticker battery lights die fast. Hardwired DIY kits risk frying your interior lights.
➤ Compatible with Sedans, SUVs, Pickups, EVs — Even Frunks: Fits inside any trunk lid or cargo edge. Available in 2m or 4m lengths to match your vehicle size — no guesswork, no measuring hassles.
➤ Cut to the Precise Length You Need: The flexible silicone strip snips neatly at marked points, conforms snugly to every curve, and sits flush for a sleek factory-look finish.
➤ IP65 Waterproof and Heat-Resistant: Endures summer heat, winter chills, and splashes when loading wet coolers. The sealed silicone sleeve is flame-retardant — not just flimsy tape stuck on a bare circuit board.
Connects to Your Factory Trunk Light Cable — No Splicing, No ECU Issues
Remove your existing trunk bulb, plug the RadianceTrack™ connector into the socket, and tuck the silicone strip along your trunk lid’s inner edge. Open the lid and the strip shines; close it and the light cuts off. Uses the same 12V wiring your car’s already designed for — no additional current to trigger ECU faults.
That’s what sets it apart from battery-powered stick-ons (which die in days) or complicated DIY hardwired kits (that take hours, multiple wire splices, and risk damaging your interior lights). One connection, one click, one trim. Done.
Why Drivers Call This Their "Must-Have Mod" After 30 Days
The feedback is clear: "I finally see what I’m grabbing." Most were skeptics — having wasted $20 twice on battery stick-ons. A simple plug-in install, even light across the whole cargo area, and after a year of weather exposure, it’s still as bright as day one.
"Tried two battery stick-ons before this. Both dead in 10 days. RadianceTrack’s lasted three months and is still as bright as day one. Honestly the best money I’ve spent on my SUV." — Marcus T., Tahoe owner
Load Groceries, Gear & Midnight Bags with Clear, Bright Light
✓ Illuminates the Entire Cargo Space, Not Just a Spot: Runs around the full perimeter, so the bag way in the back isn’t a black hole anymore.
✓ Installs in Under 10 Minutes, No Tools Needed: Swap the bulb, click the cable, peel and stick the strip. If you’ve swapped a phone case, you’ve got this.
✓ Engineered for Year-Round Trunk Wear and Tear: IP65 sealed silicone resists heat, cold, and splashes without dulling or peeling off.
How It Works: Brighten Your Trunk in Just Three Easy Steps
Step 1: Measure your trunk’s inner edge and cut the strip at the marked lines for a perfect fit.
Step 2: Remove your factory trunk bulb and snap the RadianceTrack™ adapter into the socket — no splicing, no extra wiring needed.
Step 3: Peel off the backing, press the strip onto the lid frame, close the trunk, and then open it to see your cargo area brighten instantly.
| RadianceTrack™ | Stick-On Battery Pucks | DIY Hardwired LED Kits |
|---|---|---|
| Fits all vehicles — cuts to match your trunk’s length exactly | ❌ | ❌ |
| Plugs straight into factory trunk cable — no splices, no ECU errors | ❌ | ❌ |
| IP65 sealed silicone — stands up to heat, cold, and moisture | ❌ | ❌ |
RadianceTrack™ LED Light Strip: Product Details
- Length: 2m or 4m flexible silicone strip, cut-to-fit at marked intervals
- Voltage: 12V — connects to your factory trunk light cable
- Power Draw: 20–30W — low power usage
- Light Modes: Constant on or floating "running light" effect
- Colors: Warm white, cool white, blue, or pink
- Rating: IP65 waterproof, heat-resistant, and flame-retardant silicone sleeve
Got Questions? Here's the Real Deal
Will RadianceTrack™ fit my vehicle?
Absolutely — works with sedans, SUVs, hatchbacks, pickups, EVs, even Tesla and ID.4 frunks. Choose 2m for smaller trunks, 4m for larger vehicles, then trim to your perfect size.
Could it interfere with my car’s electronics or trigger fault codes?
No chance. It plugs into the same socket as your factory trunk bulb. The power draw fits within your trunk circuit’s design — no wire splicing, no piggybacking, no ECU warnings.
Do I need special tools or a pro installer?
Nope. Just pop out the factory bulb by hand, snap in the adapter, and peel & stick the strip onto the trunk lid. Most install in under 10 minutes.
Will the adhesive last through summer heat in the trunk?
Definitely. It uses automotive-grade adhesive on a flame-retardant silicone sleeve, designed to handle temperature swings typical in trunks and engine bays. No sagging in July, no cracking in January.
Does it turn on automatically when I open the trunk?
Yes — wired to the same circuit as your factory trunk light. Open the lid, and the strip illuminates. Close it, the light shuts off. No switches, no buttons, no overnight battery drain.
Light Up Your Trunk in Under 10 Minutes — You’ll Wonder How You Ever Managed Without It
RadianceTrack™ swaps out that dull factory bulb for a sleek strip of light that wraps the whole cargo area and powers on the moment you open the lid. Plug it in once. Forget it forever. Stop unloading groceries by flashlight.
Rated 4.7 / 5 based on 1289 reviews. Showing our 5-star reviews.