RustArmor™ — Apply It, Eradicate Rust, Protect Your Metal for Years
RustArmor™ — Apply It, Eradicate Rust, Protect Your Metal for Years
High Quality
FREE US Shipping
Hassle Free Returns
Couldn't load pickup availability
Erase Rust With One Coat — Then Lock The Barrier In Place
That rusty fence, the outdoor chairs, the trailer bed, the tools left in the garage — they don’t need replacing. They just need a single brushed coat of RustArmor™. This water-based formula interacts with the rust itself, transforms it into a solid, locked-in layer, then hardens into a colored finish that water and scratches can’t penetrate.
Tired Of Sanding, Scraping, And Watching The Rust Return?
Wire brushes miss the deep spots. Naval Jelly fills the air with stink. Rust-blocking primers crack and peel by next season. You scrape, scrub, inhale fumes — and just months later, the orange invader returns like before.
➤ Bonds With The Rust Instead Of Sitting On Top: Most “rust paints” just cover up corrosion and hope for the best. RustArmor™ chemically changes the iron oxide into a stable, inert layer — leaving no corrosive residue beneath to eat your metal.
➤ Apply With Brush, Roller, Or Foam Pad — That’s All: No sanding, no grinding, no power tools. Just wipe away loose flakes, paint it on, and step away. What used to take all day now takes a single afternoon.
➤ Waterproof, Moisture-Resistant, And Scruff-Proof After Curing: The cured coating blocks water and moisture and resists everyday scratches without breaking the seal. Gates, fences, grills, trailers — stay protected season after season.
The Science: Turning Rust Into The Ultimate Shield
Iron oxide — the flaky orange substance everybody calls rust — forms when oxygen and moisture corrode bare steel. RustArmor™ reacts with this iron oxide and locks it into a stable, inert layer that clings tight to the metal beneath. The rust isn’t hidden; it’s chemically anchored right where it’s found.
Once cured, you get a paintable, waterproof color finish in your choice of Black, White, Blue, Rust Red, or Gray. No primer needed. No topcoat required. One container does it all.
“Brushed It On Like Paint. Then The Rust Just… Stopped.”
That’s the story customers tell again and again — folks who’d basically given up on a tool, railing, or patio set. Doubters until they saw the smooth coat go on and harden into a colored, durable finish within a few hours.
“Used it on a 12-year-old wrought iron gate that my wife was ready to toss. One coat of Rust Red and it looks better than when we bought it. No sanding, no fumes.” — Mark D.
“Covered the underside of my utility trailer last fall. Held up through winter salt, rain, and the working lot — still sealed tight come spring. That convinced me.” — Carla T.
Imagine The Gate, Grill, Or Trailer Locked Tight Through Every Season
✓ One Product, Three Results: Converts rust, primes the metal, finishes with your chosen color — no need for three separate cans.
✓ Paint It On In Just One Afternoon: Wipe, brush, dry. No sandpaper, grinders, or respirators needed. The applicator brush comes in the box.
✓ Water-Based, Low Odor, Family-Friendly: No harsh solvent smell sneaking through your garage. Safer to use around kids and pets than typical rust treatments.
Three Simple Steps. One Brush. Zero Sanding.
Step 1: Remove loose flakes with a cloth or stiff brush. Skip the sandpaper altogether.
Step 2: Stir the jar, then apply a smooth coat over the rusted spot. The brush you need is included.
Step 3: Allow it to cure. The coating hardens, becomes waterproof, and locks in color within hours.
| RustArmor™ | Sanding + Primer + Topcoat | Doing Nothing |
|---|---|---|
| Converts rust and seals with one brushed coat | ❌ | ❌ |
| Waterproof, scratch and moisture resistant finish | ⚠️ | ❌ |
| No sanding, grinding, or solvent fumes | ❌ | ✓ |
| Five built-in colors — no second coat required | ❌ | ❌ |
Specs You Should Know Before Purchasing
- Net Volume: 3.4 fl oz (100 mL)
- Weight: 4.76 oz
- Colors Available: Black, White, Blue, Rust Red, Gray
- Application: Water-based, brush or roller
- Includes: 1 jar of RustArmor™ + applicator brush
Common Customer Questions Before Buying
Will this work on heavy rust or just surface corrosion?
Yes. As long as the rust remains attached to the metal (not just loose flakes), RustArmor™ will convert it. Just wipe away the flaky bits with a rag or stiff brush before applying.
Is sanding really unnecessary?
Correct. No need for sandpaper, wire wheels, or grinders. Simply remove loose debris so the formula can properly react with the rust underneath.
Is it safe to use inside the home?
Being water-based and low-odor, it’s much gentler than typical rust converters or removers. Still, wear gloves, apply in a ventilated area, and keep kids and pets away until dry.
Does it hold up outdoors?
Absolutely. Once cured, the coating is waterproof and scratch-resistant, designed to endure rain, moisture, and everyday outdoor wear.
How do I store leftover product?
Seal the jar tightly and keep it in a cool, dry place away from direct sunlight and out of children’s reach. It’ll be ready for your next job.
Test It Risk-Free On Your Worst Rust Project
Brush it onto the rustiest item you’ve got — the gate, the grill grate, the trailer frame, the toolbox in the corner. If RustArmor™ doesn’t halt the rust and lock in a hard, colored finish, return it within 30 days for a full refund. The risk is ours.
Restore Your Metal. Keep It Protected.
RustArmor™ accomplishes in a single brushed coat what normally requires three products and a whole weekend of sanding. Choose your color, open the jar, and brush it on. The rust is sealed in place — and stays sealed.
Rated 4.7 / 5 based on 1289 reviews. Showing our 5-star reviews.