SteelBond Pro™ — Repair Cracked Metal in 60 Minutes Without Welding Equipment

$29.99

~~$34.99~~ $29.99

Sale Sold out

Fast Shipping (incl. Track & Trace)

High Quality

FREE US Shipping

Hassle Free Returns

Only 8 left in stock

Seal Cracks, Holes & Stripped Threads — No Welding, No Flames, No Do-Overs

You gave JB Weld a shot last winter. It failed within months. SteelBond Pro™ is the 1:1 AB epoxy that penetrates deep into the metal’s pores, sets hard as rock in 60 minutes, and cures into a steel-strength bond you can drill, sand, and paint just like the original surface.

Quit Fixing the Same Crack Twice

Hardware-store epoxies overpromise and crumble within months. Single-tube adhesives simply peel off cast iron. Welding a cracked housing costs $150+ before parts even enter the equation. SteelBond Pro™ skips all the hassle — a dual-chamber AB tube that perfectly matches ratios with each squeeze, no guessing or mixing on a scrap.

➤ Bonds Cast Iron, Steel, Aluminum & Alloys: Steel-fortified two-part mix seeps into surface pores and locks at a molecular level — sticking where superglue and single-tube fillers simply flake away.

➤ Withstands -40°F to 392°F: Ideal for engine bays, exhausts, radiators, outdoor pipes, and cold-climate joints — won’t soften under summer heat or crack in freezing cold.

➤ Drill, Sand & Paint: After curing, repaired spots behave just like the surrounding metal. Tap a new thread, refinish the surface, and blend the fix so no one can spot the repair.

Introducing SteelBond Pro™ — The 1:1 AB Formula That Bonds Like Welded Metal

Pull the trigger and the dual-chamber dispenser delivers the perfect 1:1 mix of resin and hardener every single time. Spread it over the crack with the supplied spatula. Let it sit for an hour as the chemical bond welds the metal back together — no flame, no sparks, no heavy-duty power needed.

By 24 hours, most patches are firmer than the original metal — strong enough to drill a hole, file flush, and prime right over.

Why Pros and DIYers Are Ditching Their JB Weld

Mechanics, plumbers, and weekend warriors keep choosing SteelBond Pro™ because it sticks the first time. "I had a tiny crack on my F-150 radiator housing that I’d already tried JB Weld on twice. Fixed it Saturday with SteelBond. Tuesday I drilled a new clip bracket right through the patch — totally dry." — Mark D.

Walk Away Confident Your Fix Will Hold

✓ Repairs Stick on the First Try: 4,000+ PSI tensile strength when fully cured at 24 hours — drill it, tap it, sand it without peeling or cracking.

✓ Resists Water, Oil, Salt & Chemicals: From underwater pipe joints to oil-soaked engines — the cured bond resists corrosion, mold, and solvents.

✓ One 50ml Tube Covers Multiple Jobs: Auto-matched dual chamber means no waste — use just what you need, seal the rest, and save it for another repair.

Fix Any Repair in 3 Simple Steps

Step 1: Roughen the metal with sandpaper and clean with acetone — ensures a strong, clean bond.

Step 2: Dispense a bead onto the included spatula and press firmly into the crack, hole, or gap.

Step 3: Leave it to set for 60 minutes. Return to a rock-solid patch. Full strength reached at 24 hours — drill, sand, or paint as needed.

SteelBond Pro™	Welding	Single-Tube Epoxies
Sticks on the first try — no welder, torch, sparks, or power outlet needed	❌	❌
Auto-matched 1:1 AB mix — no fiddling with two tubes on cardboard	❌	❌
Withstands -40°F to 392°F, plus resists water, oil, salt & solvents	❌	❌

Specs That Deliver Pro-Level Repairs

Capacity: 50ml dual-chamber tube (3.5 oz total) — enough for several repairs
Dimensions: 4.8 x 1.8 inches — fits neatly in a toolbox or glove compartment
Mix Ratio: Auto-balancing 1:1 A and B — squeeze the trigger and dispense with no measuring
Cure Time: 60-minute initial set, full cure in 24 hours for drill/sand/paint readiness

Still Unsure if It’s the Right Choice?

I’ve had bad experiences with JB Weld — what sets this apart?

Two key points: the auto-balanced 1:1 applicator prevents bad mixes, and the steel-infused formula cures harder than most single-tube epoxies. Surface prep is still essential — sand and wipe with acetone before applying.

Is it compatible with cast iron, aluminum, and stainless steel?

Absolutely — bonds steel, cast iron, aluminum, brass, copper, and many alloys. Also adheres metal-to-ceramic, metal-to-plastic, and metal-to-stone, perfect for mixed-material repairs.

Can I drill, tap, and paint over the patch once cured?

Yes. After a full 24-hour cure, the patched area accepts drilling, tapping, sanding, and painting just like the surrounding metal.

Will the bond withstand heat from engines or exhausts?

The hardened bond endures temperatures from -40°F up to 392°F, covering radiator housings, engine blocks, water pumps, and most exhaust parts outside of the manifold.

Is this patch truly waterproof and resistant to oil?

Yes — holds firm on submerged pipe joints, greasy engine blocks, salty environments, and damp basements. The cure creates a non-porous, chemically inert barrier.

Fix It Right the First Time — Backed by Our 60-Day Bond Guarantee

If SteelBond Pro™ doesn’t hold your repair during normal use, return it within 60 days for a full refund — no welding, no extra tubes, no costly shop fees. Order yours below and finish the job today.