VeloCraft™ — Cut, Sculpt & Shape Wood at Double Speed on Any 5″ Grinder
VeloCraft™ — Cut, Sculpt & Shape Wood at Double Speed on Any 5″ Grinder
High Quality
FREE US Shipping
Hassle Free Returns
Couldn't load pickup availability
Shape A Bowl In Hours, Not An Entire Weekend
The VeloCraft™ Wood Shaping Disc transforms the angle grinder on your bench into a carving powerhouse that carves through hardwood, pine, and bark without clogging or stalling. Its pierced carbon-steel teeth grip the wood, hollow channels eject the chips, and the curved shape maintains a smooth cut so you finish your work — not start a new fight with your sandpaper.
Quit Burning Through Sanding Discs Just To Shape One Edge
Flap discs clog up in twenty minutes. Sandpaper rolls melt under any real strain. Chainsaw discs grab and kick back the moment they hit a knot. You end up wasting your project, your wrists, and a pile of replacement pads — all when you just wanted to shape a chair leg before dinner.
➤ Removes Material From Hardwood, Pine, And Bark: Hundreds of pierced carbon-steel teeth cut into the grain from every angle, so one pass strips more wood than a full minute on a flap disc — without scorching or flattening the surface.
➤ Fits Any 5″ Grinder With A 7/8″ Arbor: The 125 mm diameter and 22 mm bore are standard sizes that work with DeWalt, Makita, Milwaukee, Ryobi, and even the unknown grinder tucked in your shop’s corner. Swap your old disc, tighten the nut, and get carving.
➤ Hollow Teeth Eject Chips Instead Of Clogging: Open channels between each tooth push sawdust and chips away the moment they’re cut. The disc stays cooler, the cut stays sharp, and you avoid stopping every two minutes to clear debris from the wheel.
Why Pierced Teeth Cut Deep While Flap Discs Just Scuff
Flap discs and sanding pads scrape the surface. They wear material down through friction — which makes them heat up, glaze over, and fail halfway through a curve. A pierced-tooth disc carves wood away. Each tooth acts as a tiny gouge with its own cutting edge and a hollow slot behind it.
As the disc spins, the teeth slice thin layers from the wood, and the hollow design lets each chip drop through the back instead of packing onto the face. The result: the cut stays razor-sharp from start to finish, the disc runs cool enough to hold bare-handed (though we don’t recommend it), and the curved shape lets you glide through contours instead of scrubbing across them.
What Weekend Woodcarvers Keep Saying After Their First Bowl
"Bought this expecting it’d die out after one chair leg. Three months later, same disc, and I’ve carved two burl bowls and a walking stick. Keeps an edge longer than any flap disc I've worn out." — Mark T.
Doubters are won over on the first cut. Less wrist strain, no blockages, and projects that once took full Saturdays wrap up by lunchtime. Curves come out crisp, edges stay sharp, and the disc keeps biting long after sanding pads would have been thrown away.
Engineered For The Control Sanding Pads Couldn’t Deliver
✓ Balanced Curved Disc For Steady Handling: The domed shape lets the disc glide over contours rather than snagging, so your grinder won’t jerk out of your grip on knots or tough grain.
✓ Forged Carbon Steel That Outlasts Pads: The solid carbon-steel core holds its edge through bowls, chair spindles, root sculptures, and rough log work. One disc replaces a whole drawer of sanding papers.
✓ Self-Clearing Holes Keep Heat And Dust Down: Perforations vent heat and sawdust away from your grinder’s motor, keeping it cooler during long carving projects and extending bearing life.
Mount, Power Up, Carve — Three Steps To Your First Contour
Step 1: Slide the disc onto your grinder’s 22 mm arbor and secure the locking nut — the 125 mm diameter fits any standard 5-inch angle grinder.
Step 2: Squeeze the trigger and let the disc reach full speed before touching the wood. Glide the curved face against the grain at a shallow angle — let the teeth do the work, not your arm.
Step 3: Roll the disc through curves, edges, and hollows. Chips drop away, the cut stays sharp, and your project shapes up in minutes — not hours.
| Why Pick VeloCraft™ Wood Disc? | Standard Sanding Pads | Other Wood Discs |
|---|---|---|
| Pierced Teeth That Actually Cut, Not Just Scrape | ❌ | ❌ |
| Fits Any 5″ Grinder With 7/8″ Arbor | ❌ | ❌ |
| Hollow Channels That Vent Chips And Heat | ❌ | ❌ |
Specs For Builders Who Read The Details
- Material: Forged carbon steel with synthetic-metal tooth tips
- Outer Diameter: 4.9 in / 125 mm — fits any standard 5-inch grinder
- Arbor (Bore): 0.87 in / 22 mm — universal 7/8-inch fit
- Profile: Curved/domed face for contour work
- Weight: 1.9 oz / 54 g — light enough for long sessions
- Compatible With: DeWalt, Makita, Milwaukee, Ryobi, Bosch, Metabo, Black+Decker, and any 5″ angle grinder with a 7/8″ arbor
Clear Replies To The Questions Carvers Actually Ask
Will this fit my angle grinder?
If your grinder accepts a 5-inch (125 mm) disc with a 7/8-inch (22 mm) arbor — yes. That fits nearly every consumer and professional grinder out there. Check your current disc; if the sizes match, this one installs easily.
Can I use it for metal, stone, or plastic?
No. The tooth design is made for wood and softer materials only. Using it on metal or masonry will dull the teeth fast and could break the disc.
What if it clogs while cutting?
Clogging is uncommon thanks to the hollow teeth, but pressing hard on green or sticky wood can pack the channels. Ease up, let the disc spin clear, and scrub the disc face with a wire brush between uses.
What safety gear should I wear?
Eye protection, cut-proof gloves, and a dust mask are must-haves. Keep your grinder’s guard on, make sure the disc is securely fitted before powering up, and clamp your workpiece — never carve freehand.
How long will one disc last?
Most weekend carvers run one disc through dozens of projects — bowls, spindles, root pieces, stump carving — before the teeth dull. It outperforms a stack of sanding pads by far.
VeloCraft™ Cuts Faster — Or You Get Every Penny Back
Attach the VeloCraft™ Wood Shaping Disc to your grinder, try it out on your next project, and notice the difference within the first minute. If it doesn’t carve wood faster than the last sanding job you slogged through, return it within 60 days. We’ll refund every penny — no restocking fees, no questions about the chips on your bench.
Rated 4.7 / 5 based on 1289 reviews. Showing our 5-star reviews.